2023
55. Cid Montoya M, Kareem A, Hernández S (2023) “Aero-structural design optimization of long-span bridges: From linear to nonlinear aeroelasticity-driven perspectives” Istanbul IABSE Symposium (ISTBR 2023), April 26-28, 2023, Istanbul, Turkey.
DOI: 10.2749/istanbul.2023.0167
54. Hernández S, Jurado JA, Baldomir A, Cid Montoya M, Kusano I (2023). “Deterministic and probabilistic approaches for aeroelastic optimization of long-span bridges,” Istanbul IABSE Symposium (ISTBR 2023), April 26-28, 2023, Istanbul, Turkey.
DOI: 10.2749/istanbul.2023.0159
53. Diana G, Stoyanoff S, Allsop A, Amerio L, Andersen M, Argentini A, Cid Montoya M, De Ville V, Hernández S, Jurado JA, Kavrakov I, Larose G, Larsen A, Morgenthal G, Rocchi D, Svendsen M, Wu T (2023). “New challenges in the IABSE TG3.1 benchmark on super long span bridge aerodynamics,” Istanbul IABSE Symposium (ISTBR 2023), April 26-28, 2023, Istanbul, Turkey.
52. Rodríguez-Segade M, Cid Montoya M, Hernández S, Díaz J (2023). “Wing nonlinear aerostatic stability analysis using an efficient modal-based approach.” 2023 AIAA SciTech Forum, January 23-27, 2023, National Harbor, MD, USA.
DOI: 10.2514/6.2023-0188
2022
51. Cid Montoya M (2022) Harnessing SimCenter tools for the aero-structural optimization of long-span bridges. 2022 SimCenter Symposium, November 4th, Austin, TX, USA.
50. Cid Montoya M (2022) Evolution of bridge aeroelasticity and wind-resistant design of long-span bridges: The contributions of Ahsan Kareem. EMI 2022 – Symposium #101 – The Next Frontiers in Natural Hazards Eng: Advancing the vision of Ahsan Kareem. Baltimore, Maryland, May 2022. (Invited presentation).
49. Cid Montoya M (2022) An uncoupled sequential method for the aero-structural optimization of bridges: Towards nonlinear aeroelastic performance-based design optimization. 14th Americas Conference on Wind Engineering. Lubbock, TX, USA. May 2022.
48. Cid Montoya M, Hernández S, Kareem A Jurado JA (2022) Shape and size optimization of long-span bridges considering nonlinear aerostatic stability performance. 14th Americas Conference on Wind Engineering. Lubbock, TX, USA. May 2022.
47. Cid Montoya M, Hernández S, Kareem A (2022) Shape optimization of single and twin-box decks of cable-stayed bridges subject to gravitational loads and several aeroelastic phenomena. IABMAS, 11th Int Conf on Bridge Maintenance, Safety and Management. Barcelona, Spain.
DOI: 10.1201/9781003322641
46. Cid Montoya M, Hernández S, Nieto F, Jurado AJ, Kareem A (2022) Wind-resistant design of long-span cable-stayed bridges focusing on nonlinear aerostatic stability: A Parametric study. IABMAS, 11th Int Conf on Bridge Maintenance, Safety and Management. Barcelona, Spain, July 2022.
DOI: 10.1201/9781003322641
2021
45. Diana G, Stoyanoff S, Allsop A, Amerio L, Andersen M, Argentini A, Cid Montoya M, De Ville V, Hernández S, Jurado JA, Kavrakov I, Larose G, Larsen A, Morgenthal G, Omarini S, Rocchi D, Svendsen M (2021). “Super-long span bridge aerodynamics benchmark: additional result for TG3.1 Step 1.2” IABSE Congress Ghent 2021 – Structural Engineering for Future Societal Needs. Sept 22-24, Ghent, Belgium.
2020
44. Cid Montoya M, Nieto F, Hernández S, Fontán A, Kareem A, Jurado JA (2020) “Aero-structural optimization of a twin-box bridge: Balancing structural, flutter and buffeting design requirements.” ACEM20-AWAS20, 2020 Int. Conf. on Advances in Wind and Structures. Aug 27, Seoul, Korea. (Online presentation because of COVID).
43. Nieto F, Cid Montoya M, Hernández S (2020) “Numerical optimization of the corner shape of the cross-section of tall buildings considering profitability and along-wind response” ACEM20-AWAS20, 2020 Int. Conf. on Advances in Wind and Structures. Aug 27, Seoul, Korea. (Online presentation because of COVID).
42. Cid Montoya M, Nieto F, Hernández S, Fontán A, Kareem A, Jurado JA (2020) “Aero-structural optimization of a twin-box deck cable-stayed bridge considering structural and flutter performance” BBAA IX 9 th Int. Colloquium on Bluff Body Aerodynamics and Applications, U. of Birmingham, UK, July 20-23, 2020. (Accepted, conference canceled because of COVID)
41. Cid Montoya M, Nieto F, Hernández S, Fontán A, Kareem A, Jurado JA (2020) “Aero-structural optimization of a twin-box deck cable-stayed bridge considering flutter and buffeting performance” BBAA IX 9th Int. Colloquium on Bluff Body Aerodynamics and Applications, U. of Birmingham, UK, July 20-23, 2020. (Accepted; conference canceled because of COVID-19)
40. Cid Montoya M, Ding F, Kareem A, Hernández S, Nieto F (2020) “A reliability-based design optimization of bridge deck shape for buffeting response” BBAA IX 9th Int. Colloquium on Bluff Body Aerodynamics and Applications, University of Birmingham, UK, July 20-23, 2020. (Accepted, conference canceled because of COVID)
39. Nieto F, Cid Montoya M, Hernández S (2020) “Corner shape optimization of the cross-section of tall buildings considering profitability and along-wind response” BBAA IX 9th Int. Colloquium on Bluff Body Aerodynamics and Applications, U. of Birmingham, UK, July 20-23, 2020. (Accepted, conference canceled because of COVID)
38. Cid Montoya M, Nieto F, Hernández S, Kareem A, Ding F (2020) “Computational techniques for novel design of long span bridges considering aeroelastic phenomena” ASCE Structures Congress 2020, session: Novel Building and Bridge Design with Structural Optimization, St. Louis, Missouri, April 5-8, 2020. (Published, conference canceled because of COVID)
DOI: 10.1061/9780784482896.070
37. Hernández S, Nieto F, Cid Montoya M, Jurado J A (2020) “Aerostructural optimization of bridge decks. Current advances and challenges” ASCE Structures Congress 2020, session: Novel Building and Bridge Design with Structural Optimization, St. Louis, Missouri, April 5-8, 2020. (Published, conference canceled because of COVID)
DOI: 10.1061/9780784482896.068
36. Nieto F, Hernández S, Cid Montoya M (2020) “Innovation in high-rise buildings: Multidisciplinary approach for the cross-section shape optimization” ASCE Structures Congress 2020, session: Novel Building and Bridge Design with Structural Optimization, St. Louis, Missouri, April 5-8, 2020. (Accepted, conference canceled because of COVID)
2019
35. Cid Montoya M, Hernández S, Nieto F, Kareem A, Jurado J A (2019) “Aerostructural shape and size optimization of a long-span bridge considering service loads, static wind loads, torsional divergence, flutter, and buffeting constraints” The 15 th International Conference on Wind Engineering 2019, September 1-6, Beijing, China. Selected for JWEIA SI.
34. Cid Montoya M, Ding F, Kareem A, Hernández S, Nieto F, Baldomir A (2019) “A reliability based tailoring of bridge deck shape for buffeting response” The 15th Int. Conference on Wind Eng. 2019, Sep 1-6, Beijing, China.
33. Nieto F, Cid Montoya M, Hernández S (2019) “Shape optimization of tall buildings considering wind directionality: surrogate-based reduced basis approach” The 15th Int. Conference on Wind Eng. 2019, September 1-6, Beijing, China.
32. Nieto F, Casteleiro A, Cid Montoya M, Hernández S, Kusano I, Jurado JA, Fontán A, Alvarez JA, Rapela C (2019) “Surrogate-based characterization of the aerodynamic response of twin-box decks considering changes in the box geometry and gap distance” The 15 th Int. Conference on Wind Engineering 2019, September 1-6, Beijing, China.
31. Jurado JA, Quintela J, Cid Montoya M, Nieto F, Hernández S (2019) “Modifications on the flutter analysis software FLAS to consider variable aerodynamic in long span bridges” The 15th Int Conf on Wind Eng 2019, Sep 1-6, China.
30. Diana G, Stoyanoff S, Aas-Jakobsen k, Andersen M, Argentini A, Cid Montoya M, Hatami A, Hernández S, Jurado JA, Katsuchi H, Kavrakov I, Kim H-K, Larose G, Larsen A, Oiseth O, Omarini S, Pathak R, Rocchi D, Svendsen M and Wu T (2019). “Super-long span bridge aerodynamics: on-going results of the TG3.1 benchmark test” 2019 IABSE Congress New York City: The Evolving Metropolis. September 4-6, New York, NY, USA.
2018
29. Cid Montoya M, Hernández S, Nieto F, Jurado J A. (2018) “Shape optimization of single box bridge decks considering gravitational loads and aeroelastic phenomena related to laminar and turbulent wind” The 7th International Symposium on Computational Wind Engineering 2018. June 18-22, Seoul, Republic of Korea.
28. Kusano I, Cid Montoya M, Baldomir A, Nieto F, Jurado J A, Hernández S (2018) “Reliability based design optimization for single box deck shape and plate thickness of suspension bridges under flutter constraint” The 7th International Symposium on Computational Wind Engineering 2018. June 18-22, Seoul, Republic of Korea.
27. Nieto F, Hernández S, Cid Montoya M (2018) “Reduced basis approach for the shape optimization of the cross-section of tall buildings” The 7th Int. Symposium on Computational Wind Eng. 2018. June 18-22, Seoul, Korea.
26. Cid Montoya M, Nieto F and Hernández S (2018) “On the aerostructural design of long-span cable-stayed bridges: The contribution of parameter variation studies with focus on the deck design” IN-VENTO 2018: XV Conference of the Italian Association for Wind Engineering 9-12 September 2018, Napoli, Italy.
25. Cid Montoya M, Hernández S., López C., Álvarez A., and Jurado J.Á. (2018) “Structural optimization of a reduced model of a windmill tower for wind tunnel testing” IN-VENTO 2018: XV Conference of the Italian Association for Wind Engineering 9-12 September 2018, Napoli, Italy.
24. Nieto F, Cid Montoya M, Fontán A, Hernández S, Rapela C, Álvarez A, Jurado J, Casteleiro A, and Garcia V. (2018) “Wind tunnel study on the effect of the gap width in the aerodynamic and aeroelastic responses of twin-box decks” AFM2018: 12th Int Conference on Advances in Fluid Mechanics. 10 – 12 July 2018, Ljubljana, Slovenia.
DOI: 10.2495/AFM180071
23. Nieto F, Hernández S, Cid Montoya M (2018) “Design of experiments: Impact in surrogate-based aerodynamic shape optimization of high-rise buildings” WES2018: The 13th UK Wind Engineering Society Conference 2018. September 3-4, 2018, Leeds, United Kingdom.
22. Hernández S, Jurado J Á, Nieto F, Baldomir A, Cid M and Kusano I (2018) “A multidisciplinary approach to optimum design of long span cable supported bridges” HPSM/OPTI 2018. The 2018 Int Conference on High Performance and Optimum Design of Structures and Materials. 11-13 July, Ljubljana, Slovenia. Invited presentation.
2017
21. Hernández S, Jurado J Á, Nieto F, Baldomir A, Kusano I and Cid Montoya M (2017) “The role of reliability analysis and optimization techniques in the aeroelastic design of long span bridges” Second International Bridges Congress – Chile 2017; Design, Construction and Maintenance. 18-20 October, Santiago, Chile.
20. Cid Montoya M, Nieto F, Kusano I, Álvarez, A. and Hernández S (2017) “Application of surrogate models in the characterization of the aerodynamic response of streamlined bridge decks” EACWE 2017. The 7th European-African Conference on Wind Engineering. 4-7 July, Liege, Belgium.
19. Cid Montoya M, Hernández S and Nieto F (2017) “Optimum design of cable stayed bridges with single box deck considering aeroelastic and structural constraints” EACWE 2017. The 7th European-African Conference on Wind Engineering. 4-7 July, Liege, Belgium. Selected for J Wind Eng Ind Aero special issue.
18. Hernández S, Menga E, López C, Baldomir A, Cid Montoya M, Freire D, Moledo S and Naveira, P. (2017) “An improved software for frequency domain analysis of assembled aircraft structures with local nonlinearities” IFASD2017. International Forum on Aeroelasticity and Structural Dynamics, 25-28 June 2017, Como, Italy.
17. Nieto Mouronte F, Hernández Ibáñez S, Álvarez Naveira A J, Kusano I, Cid Montoya M and Jurado Albarracín-Martinón J Á (2017) “Application of CFD-based methods in the aerodynamic and aeroelastic assessment of long span bridge decks and rectangular cylinders” ACHE 2017. VII congreso de ACHE. June, A Coruña, Spain.
16. Hernández Ibáñez S, Baldomir García A, Jurado Albarracín J Á, Nieto Mouronte F, Kusano I and Cid Montoya M (2017) “Integration of advanced methodologies in aeroelastic design of long span bridges” ACHE 2017. VII congreso de ACHE. June, A Coruña, Spain.
15. Hernández S, Menga E, Naveira P, López C, Baldomir A, Cid M, Moledo S and Freire D (2017) “Dynamic analysis of assembled aircraft structures with nonlinear joints” 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Science and Technology Forum and Exposition 2017.
DOI: 10.2514/6.2017-1592
2016
14. Cid Montoya M, Hernández S, Kusano I, Nieto F and Jurado J Á (2016) “The role of surrogate models in combined aeroelastic and structural optimization of cable-stayed bridges with single box deck” HPSM/OPTI 2016. The 2016 Int. Conf. High Performance and Optimum Design of Structures and Materials. 19-21 Sep, Siena, Italy. Invited presentation.
DOI: 10.2495/HPSM160011
13. Cid C, Baldomir A, Hernández S, and Cid Montoya M (2016) “Optimum number, position and size of stays in cable-stayed bridges” HPSM/OPTI 2016. The 2016 International Conference on High Performance and Optimum Design of Structures and Materials. 19-21 September, Siena, Italy. Invited presentation.
DOI: 10.2495/HPSM160031
12. Cid Montoya M, Hernández S, Nieto F, King J P C and Kong L (2016) “A user friendly software for the design of full bridge reduced models in wind tunnel testing” AFM2016: 11th International Conference on Advances in Fluid Mechanics. 5-7 September, Ancona, Italy. Invited presentation.
DOI: 10.2495/AFM160011
11. Nieto F, Cid Montoya M, Álvarez A, Hernández S and Jurado J Á (2016) “Numerical simulations of the aerodynamic response of 2D circular segments by means of URANS” AFM2016: 11th International Conference on Advances in Fluid Mechanics. 5-7 September, Ancona, Italy. Invited presentation.
DOI: 10.2495/AFM160051
10. Hernández S, Cid M, Nieto F and Jurado J Á (2016) “Optimization of stays and deck shape in cable supported bridges including structural and aeroelastic constraints” BBAA VIII: 8th International Colloquium on Bluff Body Aerodynamics and Applications—7-11 June, Northeastern University, Boston, Massachusetts, USA.
9. Jurado J Á, Hernández S, Cid M, Álvarez A. and Nieto F (2016) “Aeroelastic analyses of the deck widening of the Rande cable-stayed Bridge in Vigo (Spain)” BBAA VIII: 8th International Colloquium on Bluff Body Aerodynamics and Applications—7-11 June, Northeastern University, Boston, Massachusetts, USA.
2015
8. Hernández S, Cid M, Moledo S and Menga E (2015) “A software for filtering ground vibration test measurements and its use for identification of dynamic properties of aircraft structures” IFASD 2015: International Forum on Aeroelasticity and Structural Dynamics. 28 June –02 July 2015, Saint Petersburg, Russia
7. Jurado J Á, Sánchez R, Cid M, Hernández S and Nieto F (2015) “Wind tunnel tests of bridge deck sectional models with semicircular profile” ICWE14: 14th Int. Conference on Wind Eng. 21-26 June 2015, Porto Alegre, Brazil
2014
6. Hernández S, Moledo S, López C, Cid M, and Romera L (2014) “Identification of dynamic properties of assembled structures by optimization of the modal assurance criterion (MAC) and modal base”. 4th Aircraft Structural Design Conference. Royal Aeronautical Society. 7-9 October 2014, Belfast, UK
5. Cid Montoya M, Díaz J and Hernández S (2014) “Performance of surrogate models in reliability-based design optimization” HPSM/OPTI 2014. The 2014 International Conference on High Performance and Optimum Design of Structures and Materials. Wessex Institute of Technology. 9-11 June 2014, Ostend, Belgium
DOI: 10.2495/HPSM140351
2013
4. Díaz J, Hernández S and Cid M (2013) “Comparison of reliability based optimization methods applied to the design of composite panels” ICCS17: 17th Int. Conf. on Composite Structures. Univ. of Porto. Book of Abstracts, pp. 118.
3. Hernández S, Menga E, López C, Cid M and Moledo S (2013) “A methodology for identification of dynamic parameters in assembled aircraft structures” CMEM 2013: 16th Int Conf on Comp Methods and Exp Measurements. WIT Trans on Modelling and Simulation, Vol. 55, WIT Press 2013, ISBN: 978-1-84564-732-2, pp. 353-366.
DOI: 10.2495/CMEM130291
2. Hernández S, Díaz J, Baldomir A, Cid M and López C (2013) “Comparison of reliability based structural optimization methodologies in the design of aircraft structures.” ICOSSAR 2013: 11th International Conference on Structural Safety & Reliability. Columbia University. CRC Press/Balkema, ISBN: 978-1-138-00086-5, pp. 755.
2012
1. Hernández S, Díaz J, Cid M, Baldomir A, and Romera L (2012) “Uncertainty and reliability in aircraft design and optimization”. OPTI 2012. 12th Int Conf on Optimum Design of Structures and Materials in Eng. Wessex Institute of Technology. Computer Aided Opt Design in Eng XII, WIT Press 2012, ISBN: 978-1-84564-598-4, pp. 219-230.
DOI: 10.2495/OP120191